Comments
-
maybe turn the always on/heartbeat on each end of the tunnel, make sure handshake encryption and all the jazz is the same with SW and FN firewalls
-
@Arkwright are you a sonicwall rep?
-
untick logging in the log tab and see if it goes away. 🙂
-
what port do you have set for https on 192.168.168.168? maybe look under devices/administration/management should have the port number there.
-
thanks for spewing your feeling everywhere in a forum that doesn't support it; the wasted time in reading it was just great, maybe try a different VPN setup or lighten your encryption or just jump to where you think the grass is greener, clearly your not a tech that likes to be challenged and just expects everything to…
-
have you bought services past EOL?
-
packet capture open pcap in Wireshark
-
prtg isn't so bad for free
-
I would see denied support cause it's not current but doesn't mean it still won't work upgrading or downgrading.
-
it's sonicwalls preferably way of doing stuff but honestly for the last 8 years I just boot my config to desired firmware. either way downtime shouldn't be over a hour if you have all your ducks in a row.
-
you can always downgrade, just keep your config file.
-
did your ISP have a maintenance update right before the problem?, ours are known to take out one of our sites when they do there changes lol
-
email log automation has also stopped working since upgrading the firmware
-
allow ping on interface and allow ping in rule would be a good start
-
the whitelisting does work now but you can't right click and open new windows for your real time charts